media default_sensitivity sens All Sensitivity used if no plate has been auto-loaded onto the drum. For example, this sensitivity will be used if the load/unload script files are used or if "set sys load" is 0 and no plate is on the drum. A sensitivity of 0 will cause stroke calibration to be bypassed. real

170

0.0 to 500.0 [uJ/cm^2]

This parameter was moved to the hdm subsystem for Thermal builds using thermal module 2.58 or greater, and was renamed nominal_sensitivity. cal

../nvs/hdm_cal_sens.xmlNVS: hdm sens

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:37:14 2008 PST